Led panel light model LM-PL-96-72, 72W, Maker: WUSHENG

Application

It is widely used in the kitchen, workshops, shopping malls, schools, libraries, hospitals, hotels,
retail outlets, living rooms, airports, entertainment spaces, etc.

Replacement

Replacing CFL tube fixture , saving 70% energy

Manufacturer: Wusheng

Product Features

Structure & Material

· Super slim design 11.5mm. Matt white finish for frame surface treatment
· High hardness aero aluminum alloy material 6063
· IP20 design, indoor use
· Used for damp place such as kitchen,rest room, or special workshops

LED & Optics

· LM-80 listed LEDs realize high luminous efficacy & low opticaldecay
· 50,000 hours design lifespan, 6 times than fluorescent tube
· High efficacy LEDs 190lm/w
· Optical fire-resistant PC diffuser
· Beam Angle: 120º

Electrics

· High efficiency power supply, ENEC listed
· Input Voltage: AC86-265V, 50/60Hz
· Power Factor: >0.98
· Dimming solutions can be customized

Environmentally friendly

· No glare, mercury, ultraviolet, infrared or other hazardoussubstances
· Working Temperature: -25℃ to 55℃

Do’s & Don’t’s

1. It’s only used indoors.
2.  Check if fixtures are in good condition before using.
3.  Keep packing material away from children, and prevent children from playing.
4.  Keep necessary accessories away from swallowing by Children.
5.  Do not stare at light source directly for a long time.
6.  Please don’t cover anything on the fixture.
7.  Do not disassemble or repair fixtures by unlicensed people. Otherwise, Lumin has the right to refuse replacement ormaintenance.
8.  Must switch off electricity before cleaning. Do clean fixtures with dry soft cloth, free from chemical or corrosivematters.

Installation Instructions

1. Fixtures must be operated by a licensed electrician.
2.  Check if fixtures are solid and in good condition once packaging is open.
3.  Do not let fixture fall down from ceiling system or clash to hard stuff.
4.  Make sure that the cable of fixture is long enough to connect. Do not knot or pull the cable strongly whilewiring.
5.  Do connect input end of fixture to output end of LED driver.
6.  Wiring must be firm and tight with insulation protection well. Be aware of electricity shock.
7.  Keep fixture and LED driver away from water or liquid, free from electric leakage and electricityshock.
8.  Must use LED driver approved by Lumin, otherwise, fixtures may not work normally, and may be damaged, may cause unexpected incidents.

Lumin will not bear any responsibilities due to such deeds.